Tucky Smart Wearable Thermometer For Babies And Children

Product Description:

• 
  Tucky Smart Wearable Thermometer for Babies andChildren, thissmart thermometer can be used to remotely monitor the evolution offever.
  


• 
  Itcontinuously measures temperature without disturbing the child. Data is transmitted to a smartphone via Bluetooth.
  


• 
  It also monitors the sleeping position of Newbornsand sends an alert if they rollover.
  


• 
  Continuous follow-up of temperature You can monitor your child’s fever and the effectiveness of the medication.
  


• 
  Remote Access to Data At the nanny’s or in the room next to you: follow the evolution of the temperature.
  


• 
  Unoffensive for the child withits Silicon biocompatible and hypoallergenic materials, there is no risk of allergy
  

How to use:

• 
  Tucky-21 is a non-invasive and reusable electronic device for home use and a non-invasive and single patient use in the hospital. This product is intended for non-urgent ambulatory continuous armpit body temperature monitoring from ages 29 days and older.
  


• 
  Tucky-21 also allows position monitoring of patient from ages 29 days and older (this is however not part of its medical intended use). It is positioned under the right armpit, as high as possible, with a dedicated double-sided adhesive (ADH-21) and transmits data to the “Tucky” smartphone application.
  

Temperature monitoring:

• 
  The thermometer is set in direct mode: it takes the actual axillary temperature, without making adjustment calculations. You should thus wait about 15 minutes after placing Tucky under the armpit for the temperature to stabilize. The temperature is displayed with a colour code, indicating whether it is normal or not.
  


• 
  The arm must be closed so that the measurements are less disturbed by the environment. The normal temperature varies according to the individual (age, sex, type, skin thickness), the time of day and external factors (ambient temperature, clothing, etc.) [1]. It is therefore normal to notice temperature variations caused by changes in the environment or arm position. In this case, the trend can be interpreted by following the highest values of the last few hours.
  


• 
  An alert is issued when the temperature exceeds the “very high temperature” value. This threshold can be modified by the user in the application.
  

Position monitoring:

• 
  The device also allows position monitoring, especially for babies. An icon on the application indicates whether the baby is in one of the following 4 positions: standing or sitting, lying on his back, lying on his stomach, lying on his side.
  


• 
  An alert is issued when the child turns over on his or her stomach. This alert can be deactivated in the application.
  

Note:

to ensure this functionality, the product must be placed under the right armpit.

Caution & Warnings:

• 
  Before using the product, please read these instructions for use carefully and completely to ensure reliability of the data.
  


• 
  Tucky is a measurement tool but is not a diagnostic tool. It is not a substitute for monitoring symptoms or consulting a physician.
  


• 
  Do not use this thermometer to interpret hypothermia temperatures.
  


• 
  Tucky should only be applied with the double-sided adhesive provided (ADH-21), on clean and cream freeskin. Adhesives are single-use and non-repositionable. During use, ensure that the probe remains in continuous contact with the skin.
  


• 
  If axillary hairs are present, shave the area to maximize contact between Tucky and the skin.
  


• 
  In case of heavy sweating or use during sport activities, a single-sided medical adhesive may be added over the device to improve its hold. A list of recommended adhesives is available on the manufacturer’s website.
  


• 
  Do not apply the device on irritated or damaged skin or if an allergy to plastics (elastomer or silicone type) and/or adhesives has been detected in the patient.
  


• 
  The adhesive should be changed every 24 hours or more frequently depending on skin sensitivity. If the skin shows redness, wait until it disappears before putting the product back on. If irritation occurs, remove the product immediately and seek advice from a health care professional.
  


• 
  Tucky and adhesives should be used under normal conditions of temperature and humidity (see “Technical data”). Otherwise, measurements accuracy cannot be guaranteed.
  


• 
  The thermometer and adhesives must be transported, stored and put in dry locations, away from direct sunlight, fire, contamination and within the specified temperature and humidity ranges (see “Technical data”).
  


• 
  It must not be immersed in water: remove Tucky before bathing or showering.
  


• 
  The product has been designed to follow the curvature of the body. Do not twist it by hand and do not try to open, repair or modify it. Do not use if damaged.
  


• 
  Do not use Tucky near strong wave emitting devices (MRI scanners, scanners, portable or mobile RF communication devices) that may interfere with its operation (see “Electromag. testing”).
  


• 
  Do not use Tucky and adhesives beyond their lifespan (see “Technical Specifications”).
  


• 
  Be sure to keep Tucky and its accessories (adhesives and charger cable) away from children’s mouth. They must be used by adults.
  


• 
  The device must never be worn during charging. Its functions are then deactivated.
  


• 
  Check that your device (smartphone or tablet) is compatible with the application and has Bluetooth® and internet connectivity (see “Technical data” and list of recommended devices).
  


• 
  Before using Tucky, check the time on your phone as the application is based on it.
  


• 
  Make sure your smartphone or tablet has enough memory to store data.
  


• 
  The phone paired with Tucky using Bluetooth® must remain within signal range to receive information (see “Monitor data wherever you are”).
  


• 
  The manufacturer may change this manual and product specifications without notice. Refer to the digital version available on the manufacturer’s website.
  

Ingredients:

1. 
   One Tucky patch thermometer 5 double-sided adhesives.
   


2. 
   One USB charging cable.
   


3. 
   One instruction manual.