Flowflex Covid 19 Self Test At Home 1 Pc

Product Description:

• Corona Home Screening Test is quick and easy to use for self-examination.


• Get the result within 15 minutes.


• Detects infection in people with or without symptoms.

How to use:

• Wash or sanitize your hands. Make sure your hands are dry before starting the test.


• Read the instructions before using the SARS-Covid 2 Rapid Antigen Test.


• Check the expiration date printed on the aluminum tape bag.


• Open the bag, and place the test strip on a flat, clean surface.


• Remove aluminum from the top, avoid spillage.


• Insert the tube into the hole in the kit box.


• Open the swab packing starting from the tip of the wand, do not touch the absorbent tip of the swab with your
  hands.


• Insert the entire tip of the absorbent swab into one of the nostrils, by gently rotating the swab, inserting it
  at a distance of less than 2.5 cm starting from the edge of the nostril.


• Twist the swab 5 times, wiping it over the inner surface of the nostril.


• Take out the swab and insert it into the other nostril. Repeat step 9.


• Remove the swab from the nostril.


• Insert the swab into the test tube and rotate it for 30 seconds.


• Twist the swab 5 times, pressing against the sides of the test tube.


• Remove the swab while pressing the tube.


• Fit the dropper tip firmly into the extractor tube. Mix the solution well by shaking or rotating the bottom of
  the tube.


• Gently squeeze the tube to release 4 drops of solution into the sample basin.


• Start reading the result in 15-30 minutes.


• Once the test is complete, get rid of the group.

Interpretation of the result:

1. Test result is negative: only the control line (C) is shown, while the test line (T) is not. A negative test
   result indicates that it is unlikely that you currently have COVID-19.


2. Positive test result: Both the control line (C) and the test line (T) appear, meaning that the presence of
   SARS-Covid antigen has been detected


3. The control line (C) does not appear. Possible reasons are that the amount of sample taken is not enough, or the
   operation is incorrectly executed when a null result is obtained.

Note: The appearance of any faint line in the test line region (T) should be considered as a positive result.

Review the instructions again and repeat the test with a new strip. If you repeatedly get an invalid test result,
contact your doctor or one of the Corona test centers.

Warnings & precautions:

• Read the package insert for the rapid test.


• Do not use the test after the expiry date which is stated on the sachet.


• Do not eat, drink or smoke before or during the test.


• Do not use this test if the cyst is damaged.


• All tests, samples and potentially contaminated materials must be disposed of in accordance with local
  regulations.


• Humidity and temperature can adversely affect the results.


• Do not take nasal swabs if nosebleeds occur.


• Wash your hands well before use.


• If the extract barrier accidentally comes into contact with the skin or eyes, rinse the area with plenty of
  water and seek medical advice if necessary.


• Keep the test kit out of the reach of children and animals.


• Avoid using the nasal spray for 30 minutes before collecting the nasal swab sample.

Ingredients:

• test strip.


• Abstract barrier tube.


• Single use swab.


• Waste bag.


• Test tube holder.


• Package leaflet.

Product Details: