Beurer Clinical Thermometer FT09

Product Description:

Fever measurement made easy! The clinical thermometer with contact-measurement technology is easy to use and waterproof.

• Contact-measurement technology


• Display in °C


• Waterproof


• No mercury, without glass


• Can be disinfected


• 1 memory space


• Automatic switch-off


• Acoustic signal when measurement is complete


• Medical device


• With protective cap

Use

• First remove the protective foil from the display. For switching on, briefly press the on/off key.


• A short acoustic signal will announce that the thermometer is switched on.


• The thermometer will carry out a self-test for about 2 seconds.


• During the selftest all segments of the display will appear.


• Then the reference reading (37°C) appears.


• Then the measurement symbol “°C” flashes and “Lo” is shown on the display.


• The thermometer is now ready for use.


• During the measurement, the current temperature is displayed continuously, and the “°C” symbol flashes on and off.


• The measurement is completed when a stable temperature has been reached.


• When this stage has been reached, an acoustic signal is heard, the “°C” symbol stops flashing and the temperature measured is displayed. As long as the measured temperature is below 32 °C, “Lo °C” will appear.


• Higher temperatures will be shown directly, e.g. 32,1 °C. By prolonging the length of measurement until after the acoustic signal, more accurate measurements can be obtained.


• In case the temperature is measured in the armpit, the thermometer should be left in the armpit for the recommended time of measurement, in spite of the acoustic signal.


• If temperatures over 37,8 °C are measured, a fever alarm sounds short bleeping tones, 10 seconds long). If temperatures higher than 42,9°C are measured, the symbol for “Hi °C” will appear.


• To prolong the life of the battery, please switch off the thermometer by briefly pressing the on/off key after the measurement.


• Otherwise the thermometer will automatically switch off after 10 minutes.